ADDING SMART+ WIFI LAMPS AND LUMINAIRES

a) Auto scan mode

A new SMART+ WiFi lamp/luminaire is in fast-flashing mode (previously known as ez mode and hereafter referred as fast-flashing mode) when you switch it on, flashing around twice per second. To connect it, tap “+” button on the particular home screen page where you want to add the device, and then select “add device”. Now press the button “start automatic search” shown on the screen. The next screen will show the devices that are available in the network. You can select and add the devices shown individually by tapping the “add” button. Alternatively, for complete integration, you can also select the “add all” button shown at the top of the list. In the next screen, select the WiFi router with 2.4 GHz network and enter the corresponding password with which you want to connect your devices. If you have multiple WiFi routers at your home, then you can select the WiFi from “change WiFi network” as well. After a device is added successfully, then a message will be displayed that “the device is successfully added”.
 
b) Manual adding mode

If you cannot find the desired device with above mentioned steps, then you can also add the device manually with “add manually” button mentioned at the bottom of the screen.
To do this, set the lamp or luminaire to fast-flashing mode if it has not already been set and disconnect the lamp or luminaire from the power supply. Now select the device category tab “WiFi devices”. Then select the category “light”. In the next screen, select the WiFi router with 2.4 GHz network and enter the corresponding password with which you want to connect your devices. If you have multiple WiFi routers at your home, then you can select the WiFi from “change WiFi network” as well. Now power on the device. Select the option of fast flashing, if the device is flashing around twice per second, if not then select slow flashing for a flashing around once per two seconds. For fast flashing mode in the next step, a search will be carried out for the nearby devices. After the device is found, then it will be registered on the cloud, and it will be initialized. After a device is added successfully, then a message will be displayed that “the device is successfully added”. If connection isn’t possible in fast-flashing mode, you can try establishing a connection in slow-flashing mode (previously known as ap mode and hereafter referred as slow-flashing mode). For slow flashing, you need to connect your smartphone with the device hotspot. You are now requested to connect the smartphone to the hotspot (LDV smart+-xxxx) provided by the lamp or luminaire. After tapping on "connect with hotspot", the wlan of the smartphone must be connected to the hotspot (LDV smart+-xxxx) of the lamp or luminaire via the wlan settings of the smartphone, you need to confirm with the “yes” button that the connection was successful. In the next step, a search will be carried out for that device. After the device is added successfully, then a message will be displayed that “the device is successfully added”.
 
The lamps/luminaires can be switched from fast-flashing mode to slow-flashing mode or vice-versa by turning it on and off for five times. In the app as well, the “pairing mode” can be switched accordingly by tapping the “change adding mode” button.
 
c) Switch on/off feature

Luminaires of newer design have an additional “switch on/off” feature. For these devices, the flashing stops after 3 minutes. After this, it is no longer possible to connect to the app. After switching off and on, the lamp does not flash but remains continuously lit. A connection in the app is then possible again in the first 3 minutes.
If you want to connect this device to the SMART+ app as well, then you need to reset it first according to the steps mentioned above.
 
d) Product functions

Tap one of the lamp or luminaire icons to display the device screen to control its functions. Different functions are displayed depending on the model and respective features of the lamp or luminaire.
 
  • Brightness: to set the brightness of the lamp or luminaire.
  • Shade (white mode): to change the correlated colour temperature (CCT) of the lamp or luminaire to have different shades of white i.e., from warm white to cool white.
  • Shade (colour mode): to change the colour of the lamp or luminaire.
  • Saturation: to adjust the purity of the colour.
  • Time schedule: to set a time schedule for turning the lamp or luminaire on/off. Depending on the model of lamp or luminaire, you can also program sequences of on/off times (even just for specific weekdays) or on/off times for waking up and going to sleep, with selectable fade-in and fade-out periods.
  • Timer: to set a countdown for switching on/off the lamp or luminaire automatically after a defined time has expired.
  • Sleep & wake up schedule: to set up a time schedule for adapting your sleep and wake up needs.
  • Biological rhythm: to set different cct and brightness levels for the lamp or luminaire, so that it adapts the body clock and synchronizes it with the natural clock.
  • Music: to adapt the lamp or luminaire colours’ according to the music being played (local mode: through the product; app mode: through the app itself).
  • Mood: to set a static or dynamic mood.
  • Power off memory: to set the lamp or luminaire characteristics’ after it turns on.
  • WiFi Remote control: to enable or disable the SMART+ WiFi remote controller.