Energy savings of up to 45 % compared to luminaires that use conventional discharge lamps
Easy dimming to 33% by wiring
No upper light output ratio (ULOR 0%) when mounted at 0° tilt
Optimized product logistic, luminaire heads and power supplies to be ordered separately in stand-alone packaging
Low flicker light
5 years guarantee
Areas of application
Outdoor use (IP66)
Lighting of large areas
Sports facilities
Construction areas
Direct replacement for luminaires using HID lamps
Product features
Modular, high-power floodlight with up to 135 lm/W
Joint or separate installation with Floodlight Max power supply with up to 40 m distance
Available with 10°, 30° and 60° symmetric beam angles, as well as 50°x110° asymmetric light distribution
Mounting bracket for up to 180° tilting
Highly-transparent, tempered glass diffusor
Equipment / Accessories
Power supply not included in luminaire head delivery unit
Operation only with official 900 W power supply, GTIN(EAN) 4058075580732
Aiming device in preparation
Visor for front light cut-off in preparation
Safety advice
Floodlight Max Luminaire Heads must be operated with official Floodlight Max Power Supplies only, as described in the user manual.
If only one fixation point is used for luminaires installed higher >3m, a secondary fixation of luminaire and bracket (e.g. a restraining wire) is needed for safety reasons.
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 4 m is not expected.
All electrical connections must be made by a qualified person.
Caution, risk of electric shock.
Product in protection class I. All electrically conductive, metallic housing parts that can absorb voltage during operation or during maintenance in the event of a fault must be continuously connected to the protective earthing conductor.