4099854309489

FLOODLIGHT SENSOR 20

FLOODLIGHT SENSOR 20 17W 2K4LM 830 PS SY100 BK

LED floodlight with attached programmable light and motion sensor, for general outdoor lighting. Highly versatile due to selectable power steps (Multi Lumen) on the housing.

Build-in driver.

Pre-installed, 1 m outdoor grade (H05RN-F), with copper wrapped single wires 3x1.0 mm².

Possible nominal wattage: 17  W / 11 W, Power factor: >  0.90, Possible luminous flux: 2200 lm / 1465 lm, Luminous efficacy: 133 lm/W, Standard deviation of color matching: 5 sdcm, Color rendering index: 80, Color temperature: 3000 K, Lifespan L70/B50 at 25 °C: 100000 h, Lifespan L80/B10 at 25 °C: 75000 h, Lifespan L90/B10 at 25 °C: 35000 h.

Housing made from die-casted aluminum, protected with powder coating. Decorative PC front bezel. Bent, steel-based mounting bracket. Screws and washers made from stainless steel. Bracket, housing and sensor in Black color. PC sensor housing.

Reflector based, symmetric light distribution with 100 ° x 100 ° beam angle. LED array protected by opal, tempered glass cover. Safe and very uniform illumination, due to frosted and tempered glass diffuser. Upper light output ratio (ULOR) 0%, when mounted horizontally at 0° incline. 

Attached Passive infrared (PIR) motion sensor combined with photocell light sensor. Sensor setting via rotary switches on sensor housing. Detection threshold of daylight sensor: 10…2000 lx,  Sensor controlled switching time: 10 s…12 min, Sensor detection angle: 40 °…160 °, Detection range of motion sensor: 2…12 m.  Sensor override for permanent light, via special mains switching pattern. Sensor housing IP65 and IK07, sensor lens IP65 and IK05. 

Suitable for mounting on even surfaces, walls and ceilings. Mounting bracket with 30° angle for easy installation access. Wide rotation area: 210°.  Sensor adjustable: 350° pan and 200° tilt.

Indoor and outdoor application, suitable for operating ambient temperatures from -30…+50 °C. D-sign according to EN 60598-2-24 for fire-risk commercial unit, e.g. by accumulation of dust. Breather membrane to optimize air exchange, without compromising IP protection.

CE/CB/ENEC/EAC/UKCA

Protection class I, IP code IP65. IK code IK05. Glow Wire Test 650 °C  (IEC 60695-2-12). Surge protection: up to 4 kV (L/N-PE), D-sign according to EN 60598-2-24: Yes. Guarantee: 5 years.

Dimensions (incl. sensor): 157.00 mm x 38.00 mm x 183.00 mm, weight: 576.000 g.

Company: LEDVANCE GmbH

Article Number: 4099854309489

Article: FL 20 SN P 17W 2K4LM 830 PS SY100 BK